This state of the art horizontal boring machine is powered by a high torque Deutz air cooled diesel engine with proven dependability. Performance improvements include longer stroke twin hydraulic rams that deliver 115,000 lbs. forward thrust. a 37% increase over competitive models; hydraulic dog plate that’s operated from the control console; a single hand grip that controls both auger rotation and thrust; OPC hydraulic clutch to reduce maintenance and extend service life; foot operated track brake; and an extended casing pusher for increased spoil ejection. Call for additional information on this auger boring system and the name of your Horizontal Drilling.

Boring method is the process of sliding steel pipes between the diameters of 300 mm and 1600 mm by means of a horizontal drill. With this method, all kinds of motorways, roads and railways passes are achieved. After the spiral goes to the end, the rotational motion is stopped. The machine is pulled back to the length of the pipe and the other pipe with a spiral is lowered again.

Screw Horizontal Drilling System is a method used for laying pipelines, cables and other infrastructure systems on the ground. This method is designed to lay long pipelines and cables passing through the ground using horizontal drilling technology. In Horizontal Drilling, the rotation movement is stopped after the spiral goes to the end. The machine is pulled back the length of the pipe and the other pipe with the spiral inside is lowered again. Welding treatment continues until the line is finished.